wayne dalton idrive garage door opener remote

WAYNE DALTON IDRIVE GARAGE DOOR OPENER REMOTE HOW TO

That indicates that programming is successful The Program LED indicator will blink three times. It can be found at the top of the wall station.

Press the light on/off button on the wall station.

To program the Prodrive to a Wall Station,

To confirm, press that same button once again to see if garage door opener activates.

Press one of the buttons on the Transmitter that you wish to control your opener with.

Now you have up to one minute to complete the next step

Press and release the PROGRAM button on the opener.

To program the Prodrive to a Transmitter,

WAYNE DALTON IDRIVE GARAGE DOOR OPENER REMOTE HOW TO

Now that we have that out of the way, here is how to program the Prodrive garage door opener. For instance, if you program the 9th remote, the programmed’s first remote will be erased from the garage door opener’s memory. Just keep in mind, if you exhaust the slots, the next programmed device will erase a previously programmed remote from the system. That’s a lot of devices for an entire household, or even a workplace, depending on the size of the firm. There are eight slots for remote transmitters, two slots for wall stations, and then two slots for keyless entry pads. The Prodrive garage door opener from Wayne Dalton is made to work with up to twelve devices. It will operate correctly on the second activationĪlso: Wayne Dalton Garage Door Opener Troubleshooting: Step by Step Guide Programming the Prodrive Garage Door Opener Keep in mind that the first activation will not open or close the garage door fully. Now press the same button on the remote or wall station to see if the garage door opener activates.Reconnect the garage door opener to the door.If you don’t hear any beep, repeat steps 1 to 3. This indicates that the iDrive garage door opener is programmed successfully. Press and hold your desired button on the remote or wall station for operating the opener till you hear a beep again.Now you have up to 30 seconds to complete the next step The opener will beep to indicate that you are programming mode. This can be found on the front cover of the opener. Press the Red Program button on the garage door opener.Close the garage door and pull the emergency handle to disconnect the opener from the door.If, for some reason, you program a new device, which happens to be the seventh device, the opener will automatically erase the first device programmed from its memory.įollow these steps to program a device to work with your iDrive garage door opener. The devices can be a combination of several remote controls, a Wall Station, or Keyless Entry pads. Something worth knowing is the iDrive garage door opener can be controlled with up to six devices at a time. Programming the iDrive Garage Door Opener However, they all mean the same thing, so don’t get confused. Wayne Dalton prefers to refer to its remote controls as transmitters. One more thing: Remote controls and transmitters will be used interchangeably throughout this guide. So, ensure that you or anyone close to the door keeps away during the programming process. One safety tip before you get started is that garage doors can be hazardous to anyone close to it when operating.

In this guide, you’ll learn how to program all Wayne Dalton garage door openers, transmitters, wall stations, and Keyless Entry keypads.

Wayne dalton idrive garage door opener remote